trenchfet power mosfet 175 c junction temperature optimized for low-side synchronous rectifier operation 100 % r g tested
dc/dc converters synchronous rectifiers * SUD50N03-06P
v ds (v) r ds(on) ( ) i d (a) b 30 0.0065 at v gs = 10 v 84 b 30 0.0095 at v gs = 4.5 v 59b d g s n-channel mosfet to-252 s gd top view drain connected to tab ordering information: SUD50N03-06P SUD50N03-06P?e3 (lead (pb)?free)
parameter symbol limit unit drain-source voltage v ds 30 v gate-source voltage v gs 20 v continuous drain current a t c = 25 c i d 84 b continuous drain current a t c = 100 c i d 59 b pulsed drain current i dm 100 a continuous source current (diode conduction) a i s 25 single pulse a valanche current l=01mh i as 45 avalanche energy l = 0.1 mh e as 101.25 mj maximum power dissipation t c = 25 c p d 88 w maximum power dissipation t a = 25 c p d 8.3 a w operating junction and storage temperature range t j , t stg ?55 to 175 c
parameter symbol typical maximum unit maximum junction to ambient a t 10 sec r 15 18 maximum junction-to-ambient a steady state r thja 40 50 c/w maximum junction-to-case r thjc 1.4 1.7 c/w notes a. surface mounted on fr4 board, t 10 sec. b. based on maximum allowable junction temperature, package limitation current is 50 a. * pb containing terminations are not rohs compliant, exemptions may apply n-channel 30 v (d-s) 175 c mosfet www.freescale.net.cn 1 / 5
parameter symbol test condition min typ a max unit static drain-source breakdown voltage v (br)dss v gs = 0 v, i d = 250 a 30 v gate threshold voltage v gs(th) v ds = v gs , i d = 250 a 1.0 3.0 v gate-body leakage i gss v ds = 0 v, v gs = 20 v 100 na zero gate voltage drain current i dss v ds = 30 v, v gs = 0 v 1 a zero gate voltage drain current i dss v ds = 30 v, v gs = 0 v, t j = 125 c 50 a on-state drain current b i d(on) v ds = 5 v, v gs = 10 v 50 a v gs = 10 v, i d = 20 a 0.0053 0.0065 drain-source on-state resistance b r ds(on) v gs = 10 v, i d = 20 a, t j = 125 c 0.0105 drain source on state resistance r ds(on) v gs = 4.5 v, i d = 20 a 0.0078 0.0095 forward transconductance b g fs v ds = 15 v, i d = 20 a 20 s dynamic a input capacitance c iss 3100 output capacitance c oss v gs = 0 v, v ds = 25 v, f = 1 mhz 565 pf reverse transfer capacitance c rss 255 p gate resistance r g 1 1.9 3.1 total gate charge c q g 21 30 gate-source charge c q gs v ds = 15 v, v gs = 4.5 v, i d = 50 a 10 nc gate-drain charge c q gd v ds 15 v, v gs 4.5 v, i d 50 a 7.5 nc turn-on delay time c t d(on) 12 20 rise time c t r v dd = 15 v, r l = 0.3 12 20 ns turn-off delay time c t d(off) v dd = 15 v , r l = 0 . 3 i d 50 a, v gen = 10 v, r g = 2.5 30 45 ns fall time c t f g 10 15 source-drain diode ratings and characteristic (t c = 25 c) pulsed current i sm 100 a diode forward voltage b v sd i f = 100 a, v gs = 0 v 1.2 1.5 v source-drain reverse recovery time t rr i f = 50 a, di/dt = 100 a/ s 35 70 ns notes a. guaranteed by design, not subject to production testing. b. pulse test; pulse width 300 s, duty cycle 2 %. c. independent of operating temperature.
0 40 80 120 160 200 0246810 0 20 40 60 80 100 012345 output characteristics transfer characteristics v ds ? drain-to-source voltage (v) ? drain current (a) i d v gs ? gate-to-source voltage (v) ? drain current (a) i d 25 c ?55 c 5 v t c = 125 c v gs = 10 thru 6 v 3 v 4 v www.freescale.net.cn 2 / 5 SUD50N03-06P n-channel 30 v (d-s) 175 c mosfet
0 2 4 6 8 10 0 1020304050 0.0000 0.0025 0.0050 0.0075 0.0100 0.0125 0.0150 0 20406080100 0 20 40 60 80 100 120 0 1020304050 0 500 1000 1500 2000 2500 3000 3500 4000 0 5 10 15 20 25 30 capacitance gate charge transconductance on-resistance vs. drain current ? gate-to-source voltage (v) q g ? total gate charge (nc) i d ? drain current (a) v ds ? drain-to-source voltage (v) c ? capacitance (pf) v gs ? transconductance (s) g fs v ds = 15 v i d = 50 a v gs = 10 v v gs = 4.5 v c rss t c = ?55 c 25 c 125 c c iss i d ? drain current (a) c oss (normalized) 0.0 0.5 1.0 1.5 2.0 ?50 ?25 0 25 50 75 100 125 150 175 on-resistance vs. junction t emperature source-drain diode forward voltage t j ? junction temperature ( c) v sd ? source-to-drain voltage (v) ? source current (a) i s 100 1 0.3 0.6 0.9 1.2 1.5 v gs = 10 v i d = 20 a t j = 25 c t j = 150 c 0 10 r ds(on) ? on-resistance ( ) r ds(on) ? on-resistance www.freescale.net.cn 3 / 5 SUD50N03-06P n-channel 30 v (d-s) 175 c mosfet
0 6 12 18 24 30 0 25 50 75 100 125 150 175 safe operating area v ds ? drain-to-source voltage (v) ? drain current (a) i d 1000 10 0.01 0.1 1 10 100 1 100 t a = 25 c single pulse normalized thermal transient impedance, junction-to-ambient square wave pulse duration (sec) 2 1 0.1 0.01 10 ?4 10 ?3 10 ?2 10 ?1 110 normalized effective transient thermal impedance maximum drain current vs. ambiemt t emperature t a ? ambient temperature ( c) ? drain current (a) i d 0.2 0.1 0.05 0.02 single pulse duty cycle = 0.5 1 ms 10 ms 100 ms dc 10, 100 s 1 s 1000 100 0.1 10 s 100 s limited by r ds(on) 2 1 0.1 0.01 10 ?4 10 ?3 10 ?2 10 ?1 110 0.2 0.1 duty cycle = 0.5 100 normalized thermal transient impedance, junction-to-case square wave pulse duration (sec) normalized effective transient thermal impedance 0.05 0.02 single pulse www.freescale.net.cn 4 / 5 SUD50N03-06P n-channel 30 v (d-s) 175 c mosfet
www.freescale.net.cn 5 / 5 disclaimer material category policy all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. freestyle intertechnology, inc., its affiliates, agents, and employees, and all persons acting on it s or their behalf (collectively, ?freestyle?), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. freestyle makes no warranty, representation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on freestyle?s knowledge of typical requirements that are often placed on freestyle products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customer?s responsib ility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customer?s technical experts. product specifications do not expand or otherwise modify freestyle?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, freestyle products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the freestyle product could result in personal injury or death. customers using or selling freestyle products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold freestyle and its distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay freestyle intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the european parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some freestyle documentation may still make reference to rohs directive 2002/95/ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. SUD50N03-06P n-channel 30 v (d-s) 175 c mosfet
|
